Forging的問題，透過圖書和論文來找解法和答案更準確安心。 我們找到下列問答集和資訊懶人包

The Theory and Practice of Creative Coaching: Analysis and Methods

為了解決Forging的問題，作者Turner, Arthur 這樣論述：

The Theory and Practice of Creative Coaching is a book that seeks to unearth new and exciting ways of coaching individuals in organisations and communities generally. Much of the practical writing about coaching is dominated by the use of coaching models and approaches and less work has been unde

rtaken exploring the human basis for this work. Taking its source of inspiration from a wide range of sources such as philosophy and the practical joys of nature this book will seek to fill some gaps in the ways in which practice unfolds. Much of work undertaken has been against the practical backdr

op of pitching theory against practice . In addition, more recently, this is set against trends involved in Higher Education whereby mature adults are undergoing over 12 months of training to achieve the nationally recognised ILM coaching qualifications at Levels 5 and 7. This represents contact wit

h a diverse set of cohorts of learners of over 300 students in the past 5 years for more than 100 contact hours per cohort. Mixing theory with practice is one of the strong points of these vocational qualifications ’producing’ highly motivated practitioners forging their understanding in the fulcrum

of reflective practice and individual reflexivity.Against this backdrop ideas, concepts and new ways of thinking have produced groups of coaches who are adept at utilising core and fundamental aspects of human nature to become successful coaches. Huge shifts in understanding have been made through

engaging in creative activities; to engaging in art, metaphors, nature, walking and unusual methods of engagement with a fellow human in a coaching setting. As a result, this book sheds light upon the use of creative techniques and begins to extend the possibilities for coaches and their clients. Pi

tched as a way in which peers and equals can work together to learn and develop alternative coaching approaches this book forms the platform for strong learning and an increased diversity of practice and understanding.

Forging進入發燒排行的影片

台灣威權時期的農地政體變遷

為了解決Forging的問題，作者彭思錦 這樣論述：

本研究立基於國家中心論的制度分析架構討論台灣威權政府時期的土地變遷過程。希望回答為何台灣會在1970年代農業生產退居經濟發展的次要角色時，為何政府還要通過農業發展條例、區域計畫法等被過往學者視為是限制農地他用的立法？為了回答前述問題，本文採用歷史社會學已變項為中心之方法，區分出行動者、理念、權力、反餽等四個變項，一方面作為制度分析中討論制度變遷如何可能的架構，另一方面討論當時主導台灣農地使用政策的行動者之間其對於制度的反餽、提出的理念以及其權力關係等，作為理解當時立法過程的分析架構。而本研究結果顯示，在1950年代和1960年代早期，省糧食局在台灣農地使用政策上扮演了相當重要的角色，透過土地

改革、糧食調查員等制度設計，其達成了以地綁糧，亦即透過掌握土地進而掌握糧食生產的方式，除了達成國民政府的糧食需求外，亦得以透過糧食外銷賺取外匯。不過到了1965年以後，由於省糧食局長期壓低糧價，使得農業生產出現了農民收入降低、農村勞動力流失等現象，使得農復會和部分農經學者開始批評省糧食局建立的糧食生產制度。而在同一時期，台灣稻米的主要外銷國家日本，其國內生產復甦和泰國、越南等地亦向日本銷售稻米的情形下，使得台灣稻米的外銷市場不在，亦讓省糧食局對於國民政府的重要性開始降低。也因此行政院於1969年時通過了檢討台灣糧食生產政策的決議，使得擔任省糧食局局長長達24年的李連春離任，省糧食局亦進行改組。

而其為以地綁糧目標所推動的各種政策亦被一一廢除。也因為如此，國民政府為了解決農民因農業生產困難而到城市謀求收入更高之工作的現象，而分別在1970年代通過農業發展條例、區域計畫法，在1980年代推動八萬農業大軍、農業健康保險、農地重劃條例等辦法，希望透過以地綁人的方式，將農民留在農村當中，不要大量湧入都市，造成都市問題。整體而言，本研究認為在1970年代初期的制度變革，其目的在於維繫社會穩定，進而穩定國民政府的統治。

The Perfect Sword: Forging the Middle Ages

為了解決Forging的問題，作者Albert, Edoardo,Gething, Paul 這樣論述：

In 2000, archaeologist Paul Gething rediscovered a sword. An unprepossessing length of rusty metal, it had been left on a shelf for thirty years. But Paul had a suspicion that the sword had more to tell than appeared, so he sent it for further tests. When the results came back, he realised that he h

ad in his possession what was possibly the finest, and certainly the most complex, sword ever made, which had been forged in seventh-century Northumberland by an anonymous swordsmith.This is the story of this sword: how and why it was made, who made it and what it meant to the warriors and kings who

wielded it for three centuries. It is also the story of the archaeologists and swordsmiths who found, studied and attempted to recreate the sword using only the materials and technologies available to the smith who first made it.The result is a remarkable journey into the life and items of a semina

l but little documented period of history when the foundations for what would become England, Wales and Scotland were laid.

不同接觸壓力對表面硬化鑄鐵之磨耗研究

為了解決Forging的問題，作者宋品震 這樣論述：

本研究探討FC350波來體基片墨鑄鐵與FCD450肥粒體基球墨鑄鐵兩種原料經過氣體軟氮化處理、不同的沃斯田鐵化溫度為840℃、880℃和940℃油淬後分別再進行200℃低溫回火後以及調質後再去做氣體軟氮化等三種製程的組織與硬度特性，並討論不同荷重的接觸壓力下對於其磨耗性能的影響。FC350波來體基灰鑄鐵塊材表面做高週波淬火感應硬化後，並分別做高週波線上回火以及4°C冰水冷處理，對FC350灰鑄鐵感硬硬化層組織及硬度特性之比較，並針對各種階段測試之高週波參數熱處理件之殘留沃斯田體含量及殘留應力進行量測，再進行硬度檢測及有效硬化深度、表面硬化層和心部組織觀察。 實驗結果顯示FC350與FC

D450經過840℃淬火回火後，其組織為淬火回火麻田散體，FCD450還可觀察到許多殘留肥粒體，而經過880℃和940℃淬火回火後，可以觀察到白色殘留沃斯田體的開始出現，但FCD450在880℃淬火回火後還是有些許的殘留肥粒體存在，隨著沃斯田體化溫度越高，殘留沃斯田體區域會越多。微硬度檢測可以發現兩種原料不管是否有調質，白色氮化層厚度皆約10μm且硬度都大於950HV。磨耗試驗發現兩種鑄鐵淬火回火後有著起始壓力增加，重量損失增加；沃斯田體化越高，重量損失減少的趨勢，但FC350在940℃淬火回火後有大量殘留沃斯田體，故重量損失反而增加。而氣體軟氮化處理之兩種試片，有無經過調質的試片重量損失相差

不大，所以並不用先調質再去做氣體軟氮化，也能得到良好的磨耗效益。 針對FC350灰鑄鐵使用功率6.4KW載台移速85(0.8mm/s)之淬火試片之硬化層硬度最高為775HV0.3，有效硬化深度(550HV)約為2250μm，殘留沃斯田體含量高達20.9%。功率5.1KW載台移速120(0.8mm/s)之線上回火試片硬化層硬度仍可以保持在600HV0.3(55HRC)以上，殘留沃斯田體含量可以下降至3%以下。經過4℃冰水冷處理20分鐘再使用空氣爐180℃低溫回火一小時，也可以降低殘留沃斯田體含量至11.5%。由磨耗試驗證實高週波感應硬化後之試片相較於原材能增加其耐磨性，經過線上回火與冷處理

過後會降低殘留沃斯田體含量，磨耗效益更優於高週波淬火過後之試片。